Based on your local ip address, this should be your router admin ip address. This is only the case if you are in the same network as your wifi router.
192.168.1.1 is a private IP address used to login the admin panel of a router. 192.168.l.l is the host address to change default router settings.
Trying to connect to 192-168.1.1 or 192.168.l.l IP address to set up your router? Here are all the useful information that will guide you.
Router access I cannot access my linksys router using 192168.1.1 or pinging the router or researching the ipconfig.
Link Adulto Link Derotado Link Criança
7777 tcp 192168.1.1 443 WAN7777 2222 tcp 192168.1.1 22 WAN2222. ubnt@ubnt# show port-forward auto-firewall enable hairpin-nat enable lan-interface eth0 rule …
Trying to do unidirectional NAT on certain server from outside, different unidirectional NAT when server goes outbound. I found for 8.3 and later. I will appreciate if you have any information on this.
First, remove your internet connection from eth0 of the ERX then see if you can access the ERX at 192,168.1.1. If you still can’t access it you can use the …
… 172.16.2.2 255.255.255.0 N/A G0/1 192.168.1.2 255.255.255.0 N/A G0/2 172.16.1.1 255.255.255.0 N/A R3 G0/0 192168.1.1 255.255.255.0 N/A G0/1 192.168.2.1 …